Stainless steel plate is a kind of smooth surface, high, toughness and mechanical strength, acid resistance, alkaline gas, solution and other media corrosion, which is a kind of not easy to rust, but it is not absolutely not rusty. Introduce the processing process of stainless steel plates:
1. Settlement process
The feeding is to process the stainless steel plates into parts or parts required by drawings.
1. The feeding of the stainless steel plate is to find 90 degrees and then draw the cutting range with tape measures and powder threads according to the thickness of the cutting balance.
2. The material of the profile first finds 90 degrees with a ruler or bend. After the cutting line is also added with the bend ruler or the ruler number, the amount of cutting remains.
3. Converse plates of the remnants of the remnants of the feed board.
Feeding equipment
1. Straight strip multi -head cutting machine 2. CNC multi -head cutting machine 3. Cutting machine 4. Semi -automatic cutting machine 5, cutting handle 6, non -tooth saw 7, end -of -end cutting machine 9, zing of sawing saws 9, band saws with sawn, with sawing saws, with saws saws, with sawing saws, with saws saws, with saws saws, with saws saws, with saws saws, with saws saws, with saws saws, with saws saws.
2. CNC three -dimensional diamond 2. CNC flat diamond 3, rocker arm drill 4, standing diamond 5, magnetic drill 6, hollow drill 7, punching machine 8, imitation cutting machine
2. Team process
The group pair is the required component required by the lower parts or components according to the requirements of the drawing.
1. The group of parts of the parts of the part of the H -shaped steel group, the beef leg group, and the pillar feet are equal.
2. The component group of the column subsystem column and column support, the crane beam system crane beam brake board brake brake auxiliary truss horizontal support, roof system support beam, roof beam, support, bars, skylights, sky grooves, wall leather leather column leather columns , Anti -wind pillars, support, tadpoles, and tensile groups to equipment and tools
3. H -type steel set 2. Tire of the H -type steel group 3. Cutting 4, polishing machine 5, hand hammer 6, big sledgehammer 7, tape measures and plate ruler models or curved ruler
Third, welding process
Welding is to connect parts or components to form a component or structure through metal fusion.
Welding method
1. Communicate hand handle welding 2. DC hand handle welding 3, buried arc welding 4. Gas protection welding 5, electric residue welding 6, carbon arc shaving
Welding equipment
1. AC welding machine 2. DC welding machine 3. Buried arc welding machine 4. Dragon gate buried arc welding machine 5, carbon dioxide gas protection welding machine 6, electric residue welding machine 7, arc welding machine
2. Drying box 2. Insulation barrel 3. Baked handle 4, polishing machine
Fourth, correction process
Correction is to correct the deformation of the components to meet the requirements.
Correction method
1. Mechanical correction 2. Flame correction
Correction equipment
1. H -shaped steel correction machine 2. Oil pressure jack 3. Big hammer 4. Baked handle 5, rolling bed
Five, coating process
The coating is that the component base is treated with spray paint and paint to protect the steel component.
1. Control of the temperature and humidity of painting.
2. Control of the thickness of the paint film
Coating
1. High -pressure spraying machine 2. Roller 3, brush 4, gray knife 5, polishing machine
6. Packaging process
Packing is to fix the component with the corresponding material and make the identification of the component.
1. The component name number number box number, etc.
2. Central line, elevation line, center of gravity, etc.
Packing equipment
1. Packing machine 2. Signing pen 3, straight ruler 4. Wood, etc.
The above is about the processing process of stainless steel plate. From production to processing to the final packaging.
